Hotline:  86  27 84899919
             39 011 2482329
Solution solution
Hot Products / Hot Products
2013 - 11 - 29
V4机器人焊钳介绍:  产品参数  1.最大电极压力可达到6.5KN。  2.标准臂长可做到800mm(特殊需求可定制)。  3.可使用中频(1000-1800HZ)、工频(50HZ/60HZ)变压器。  4.可使用ISI专用电机,或者使用标准机器人电机,如KUKA、FANUC、Yaskawa、ABB、COMAU。  5.焊钳重量60Kg-82Kg(臂长800mm)。  6.变压器功率65KVA ...
Contact us
Phone: 027-84899919
Adress: China WuHan Economic and Technological Development Zone 3 Dongfeng Road East 9th Floor, Block E co Center
solution solution
Lateral assembly line
Date: 2016-01-28
Views: 162

Layout plan of lateral production line


3D design of lateral assembly line


Simulation of lateral assembly robot

  The project aims to produce left and right lateral assemblies, which are divided into three parts, namely, assembly of left/right lateral outer panels, assembly of left/right lateral inner panels, and liner of left/right rear wing subassemblies, which are expected to complete by four technical means of welding, gluing, punching and MIG welding. Work pieces are loaded manually and welded by robot on main production line, handling between stations is completed by robot, and finished parts are grabbed by robot from production line to automated guided vehicle. A total of 7 robots are used for welding and handling operations.

Back to the top
Copyright ©2005 - 2023 ISI-GF EQUIPMENT (WUHAN) CORP., LTD.
TELAdd.:   4F, No. 88, Houguanhu Avenue, ETDZ, Wuhan, China
TEL:86  27  84899919
FAX:  86 27 84796721