Hotline:  86  27 84899919
             39 011 2482329
Products Products
Hot News / Hot News
2016 - 01 - 06
Clicks: 241
ISI-GF Equipment (Wuhan) Co., Ltd is planning on a major assets restructuring deal. The shares of the company have suspended for transfer from August 26, 2015, and the Announcement of ISI-GF Equipment...
2015 - 10 - 08
Clicks: 146
Proposal on Incorporation of Controlled Subsidiary was discussed and approved at 8ths Session of 1st directors’ meeting of ISI-GF Equipment (Wuhan) Co., Ltd.  Main contents of the proposal: to make mo...
2015 - 01 - 15
Clicks: 189
On January 15, 2015, the company was listed for public transfer at National Equities Exchange and Quotations, indicating its official admission in stock market to draw attention from profitable instit...
Contact us
Phone: 027-84899919
Adress: China WuHan Economic and Technological Development Zone 3 Dongfeng Road East 9th Floor, Block E co Center
Products Products
V4机器人焊钳介绍:  产品参数  1.最大电极压力可达到6.5KN。  2.标准臂长可做到800mm(特殊需求可定制)。  3.可使用中频(1000-1800HZ)、工频(50HZ/60HZ)变压器。  4.可使用ISI专用电机,或者使用标准机器人电机,如KUKA、FANUC、Yaskawa、ABB、COMAU。  5.焊钳重量60Kg-82Kg(臂长800mm)。  6.变压器功率65KVA @50%。  适用范围  可匹配KUKA、ABB、FANUC、COMAU机器人。  产品特点  1.800mm臂长时最大重量82公斤,整体重量轻,生产线整体轻量化程度高。  2.机器人有效载荷80-100KG,降低机器人负载,可整体降低机器人成本。  3.低惯量,机器人速度可提升空间大,增加生产节拍,提高生产效率。  2.伺服电机,变压器,钳体均为模块化设计,生产制造工艺性良好,可规模化生产,成本可控。  3.C型钳和X型钳共用一个钳体,伺服电机,变压器均可通用,极大降低了加工费用和制作成本,使得焊钳整体成本降低。  4.模块化结构,维修维护方便,最复杂零件更换时间不超过15分钟。  5.所有钳型,钳体部分可全部通用,整体生产线钳体均一致,一次性投入备件量极大降低。  6.生产线调整更换钳臂即可,适应主机厂车型变化较快的节奏,无需更换整体焊钳,一次性投入即可布局未来!
Back to the top
Copyright ©2005 - 2023 ISI-GF EQUIPMENT (WUHAN) CORP., LTD.
TELAdd.:   4F, No. 88, Houguanhu Avenue, ETDZ, Wuhan, China
TEL:86  27  84899919
FAX:  86 27 84796721